Victron Energy Smart Solar MPPT Regulator 75/15
zoom_out_map
chevron_left chevron_right

Victron Energy Smart Solar MPPT Regulator 75/15

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.

Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect.

$144.55

X
PayPal
SmartSolar Charge Controller MPPT 75/10 MPPT 75/15
Battery voltage 12/24V Auto Select
Rated charge current 10A 15A
Nominal PV power, 12V 1a,b) 145W 220W
Nominal PV power, 24V 1a,b) 290W 440W
Max. PV short circuit current 2) 13A 15A
Automatic load disconnect Yes, maximum load 15A 20A
Maximum PV open circuit voltage 75V 100V
Peak efficiency 98%
Self-consumption 12V: 25 mA 24V: 15 mA
Charge voltage 'absorption' 14,4V / 28,8V (adjustable)
Charge voltage 'float' 13,8V / 27,6V (adjustable)
Charge algorithm multi-stage adaptive
Temperature compensation -16 mV / °C resp. -32 mV / °C
Continuous load current 15A 20A
Low voltage load disconnect 11,1V / 22,2V or 11,8V / 23,6V or Battery Life algorithm
Low voltage load reconnect 13,1V / 26,2V or 14V / 28V or Battery Life algorithm
Protection Battery reverse polarity (fuse) / Output short circuit / Over temperature
Operating temperature -30 to +60°C (full rated output up to 40°C)
Humidity 95%, non-condensing
Data communication port VE.Direct (see the data communication white paper on our website)
ENCLOSURE
Colour Blue (RAL 5012)
Power terminals 6 mm² / AWG10
Protection category IP43 (electronic components), IP22 (connection area)
Weight 0,5 kg 0,6 kg
Dimensions (h x w x d) 100 x 113 x 40 mm 100 x 113 x 50 mm
STANDARDS
Safety EN/IEC 62109-1, UL 1741, CSA C22.2
1a) If more PV power is connected, the controller will limit input power.
1b) The PV voltage must exceed Vbat + 5V for the controller to start.
Thereafter the minimum PV voltage is Vbat + 1V
2) A higher short circuit current may damage the controller in case of reverse polarity connection of the PV array.