Clearview HD1111i HDMI Mpeg4 HD RF Modulator Single Channel
chevron_left chevron_right

Clearview HD1111i HDMI Mpeg4 HD RF Modulator Single Channel

Clearview HD1111i HDMI Mpeg4 HDMI Single channel RF modulator Ideal for Pay TV or CCTV systems. Run one HDMI source into this device. It can be run into an existing TV system to support the display of the device on all TVs connected to the existing TV system.


or 7 Fortnightly Instalments of $55.35 Info


Please note that the HD1010 will play only on later TVs
that do not support MPEG4 content. If your TV does not support the new 9 HD or Racing channel then your TV does not support Mpeg4.

It has a high level output and when used
in a domestic situation it may overload
your TV and blank out all the channels.
To overcome this use a 18 to 24dB
attenuator between the modulator and TV.

Interface HDMI x 1
480i, 576i, 720p, 1080i, up to
Aspect Ratio 16:9, 5:4
Bit rate 1.00~18.00 Mbps
Encoding MPEGI layer 2, AAC LC
Sample rate 48KHz
Bit rate 64, 96,128, 192, 256, 320kbps
DVB-T Modulator Section
Standard DVB-T COFDM
Bandwidth 6M, 7M, 8M
Constellation QPSK, 16QAM, 64QAM,
Code rate 1/2, 2/3, 3/4, 5/6, 7/8.
Guard Interval 1/32, 1/16, 1/8, 1/4
Transmission Mode: 2K, (8K Optional)
MER =>30dB
RF frequency 174-233, 470 - 858MHz in 1KHz steps
RF output level 89 to 100 dBuV in 1db steps
Management LCD + control buttons
Language English
LCN Insertion yes
Upgrade only via USB
Power supply DC 12Vwith 240V Power Pack
Dimensions 153X110X50mm

Weight 1kg
Operation temperature 0 - 45 Deg C

2 kg