Victron Multi 12-3000-120-50

Multi-function inverter / charger with intelligent power management 120 Volt 60 Hz output at 3000 VA continuous Works as a UPS system for un-interruptable power Parallel capability up to 18 kVA when used with multiple units

Three phase capable when three units are connected together Split phase capable when two units are connected together to produce 120/240 volts Charger power control option for use when incoming power is limited (requires external remote panel) Power assist function to assist starting large loads when running from generator power Peak power 6000 Watts Max efficiency 93% Four stage adaptive charging - charger can be programmed for different battery types.  

A temperature sensor is included. Dual bank charging (120 amps for main bank and 4 amps for auxiliary bank) Easy setup with dip switches or a computer (computer setup requires MkIIUSB interface)

Multi-functional The Victron MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Models range from 800VA to 5000VA per module. Unique PowerAssist feature The Victron MultiPlus will prevent overload of a limited AC source. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery. Uninterrupted AC power (UPS function) In the event of a grid failure or shore or generator power being disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three phase and split phase capabilities. Features Two AC Outputs. Virtually unlimited power thanks to parallel operation. Three phase capabilities. Power Control - Dealing with limited generator, shore side or grid power. Power Assist - Boosting the capacity of shore or generator power. Solar energy: AC power available even during a grid failure. System configuring. On-site Monitoring and control. Remote Monitoring and control. Remote configuring.


Multi-function inverter / charger with intelligent power management 120 Volt 60 Hz output at 3000 VA continuous Works as a UPS system for uninterruptable power Parallel capability up to 18 kVA when used with multiple units Three phase capable when three units are connected together Split phase capable when two units are connected together to produce 120/240 volts Charger power control option for use when incoming power is limited (requires external remote panel) Power assist function to assist starting large loads when running from generator power Peak power 6000 Watts Max efficiency 93% Four stage adaptive charging - charger can be programmed for different battery types.  

A temperature sensor is included. Dual bank charging (120 amps for main bank and 4 amps for auxiliary bank) Easy setup with dipswitches or a computer (computer setup requires MkIIUSB interface) 

MultiPlus 12/3000/120
PowerControl yes
PowerAssist yes
Transfer switch (A) 50
Parallel and 3-phase operation yes
Inverter
Input voltage range (V DC) 9,5 – 17 V ; 19 – 33 V
Output voltage: 120 VAC ± 2%;Frequency: 60 Hz ± 0,1% (1)
Cont. output power at 75 °F (VA) (3) 3000
Cont. output power at 75 °F (W) 2500
Cont. output power at 100 °F (W) 2200
Peak power (W) 6000
Maximum efficiency (%) 95
Zero-load power (W) 15
Zero load power in AES mode (W) 10
Zero load power in Search mode (W) 4
Charger Input voltage range: 95-140 VAC ; Input frequency: 45 – 65 Hz ; Power factor: 1
AC Input
Charge voltage 'absorption' (V DC) 14.4
Charge voltage 'float' (V DC) 13.8
Storage mode (V DC) 13.2
Charge current house battery (A)(4) 120
Charge current starter battery (A) 4
Battery temperature sensor yes
General
Auxiliary output(5) yes (32A)
Programmable relay(6)
Protection(2) a -g
VE.Bus communication port - For parallel and three phase operation, remote monitoring and system integration
General purpose com. Port(7) yes (2x)
Remote on-off yes

Now with 5 year warranty 

*Please Note: Freight cost quoted on checkout is only a guide, please call us before finalising your transaction*

• Model:PMP123021010